Dualit 3en 1 Manuel D'utilisation Et Garantie page 15

IB-DCM2X-US-A.2_Layout 1 03/04/2014 10:45 Page 28
TROUBLEsHOOTINg gUIDE
Problem
Coffee leaking
from the
brewhead
My machine is
making a loud and
continuous
pumping noise
My machine is not
working
The lights are off and the
machine ceases to operate
steam is venting
from the drip tray
Possible cause(s)
1. Dried coffee on the gasket.
2. EsE pod or NX capsules not seated correctly.
3. Blocked showerhead.
4. Damaged gasket.
1. Water tank is not correctly seated in position.
2. Water tank is empty.
1. Fuse may have failed.
1. Water is being purged through the machine to
reduce operating temperature ready for the
next coffee.
28
Solution(s)
1. Clean gasket (see page 16, fig 1-3).
2. Check the capsule is in place. If using EsE pod, tuck the tab under (see page 11, fig 5).
3. Clean showerhead (see page 16, fig 1-3).
4. To obtain a new gasket contact the Electra-Craft customer helpline on
(201) 439-1700 or email info@electra-craft.com.
1. Locate water tank (see page 8, fig 1).
2. Fill water tank (see page 8, fig 1).
1. Check and replace the fuse.
1. This is not cause for concern. This will automatically stop when the machine has
finished purging.
29