CASCO PF 100 Mode D'emploi page 10

AFFIXING HOLLAND CLOTH ALL-ROUND
PROTECTION
This is achieved using the five snaps along the inner
edge of the helmet inner shell and temple area by me-
ans of the pins along the interior construction.
Fig. 11
MOUNTING THE FLASHLIGHT
As an option, a flashlight holder can be fitted to each of
the helmet adapters (right /left) (Fig. 13).
Fig. 13
REPLACEMENT OF PARTS
All the components in your helmet are designed for simplicity of replacement without the use of special tools.
The sweatband can be removed simply for cleaning or replacement. The supporting equipment can likewise
be replaced in its entirety by undoing the safety screws (Fig. 2/10). CASCO offers a variety of accessories
and spare parts for the PF 1000 series, please contact CASCO for information regarding its current selection.
FIRE FIGHTING HELMETS
Standard colours
PF 1000 R noctilucent ..................................................................................................................8.1050.11V
PF 1000 R day-glow ..................................................................................................................... 8.1050.13V
PF 1000 EXTREME noctilucent ....................................................................................................... 8.1001.11
PF 1000 EXTREME day-glow .......................................................................................................... 8.1001.13
Further colors / special colors upon request.
ACCESSORIES
- Eye protection visor ......................................................................................................................8.2047.00
- Neck protection leather ................................................................................................................8.2030.02
- Neck protection aluminized ..........................................................................................................8.3011.25
- Neck protection Nomex ................................................................................................................8.3026.05
- All-round Dutch cloth neck curtain, Nomex ...................................................................................8.3026.04
- Flashlight Power Light 500 Vario....................................................................................................8.5035.04
- Adapterset Power Light for PF 1000
(right side)
- Bracket for flashlight
(usable in connection with 08.5034.06)
18
AFFIXING NECK PROTECTOR
This is done by means of
the five press studs along
the helmet inner shell
(Fig. 12).
Fig. 12
USE OF RESPIRATORY MASK
Please note that the interior construction is
perfectly suited for use with a respiratory mask.
There is no need to order this separately. The angled
form of the head band allows the respiratory mask
an optimum fit within the helmet (Fig. 14).
Fig. 14
.................................................................................8.5037.03
......................................................................8.5034.05
SPARE PARTS
- Panorama visor, PPSU, tested to EN 11458 .................................................................................. 8.2046.50
- Panorama visor PC 2 mm standard clear .......................................................................................8.2047.10
- Internal fittings complete ...............................................................................................................8.2015.01
- Straps complete ............................................................................................................................8.2015.02
- Separate adapter plate ..................................................................................................................8.5034.06
Further spare parts upon request. All spare parts are exclusively intended for use with CASCO PF 1000 series
helmets and have all undergone an EU type examination.
TRANSMISSION FACTOR TO DIN EN 14458:2004
As can be seen from this illustration, the protection against radiated heat offered by this visor is dependant on the
temperature of the heat source. The visor should only be used in those situations where it can reduce exposure
of the wearer's eyes to less than 100 W/m².
Transmission factor 75% at 2400 K source temperature
100
90
80
70
60
50
40
30
20
10
500 1000
Transmission factor, low temperature
CLEANING AND CARE
Only clean helmet shell and interior with lukewarm soapy water. The interior of the helmet can also be treated
with disinfectant (e.g. CASCO helmet freshener). Do not use solvents. The safety helmet must be cleaned,
maintained and handled properly so that it will function perfectly. Proper cleaning, care and handling of the
safety helmet are prerequisites for its faultless functioning.
ALTERATIONS TO THE HELMET
Attention! In its standard design, your helmet complies with the applicable standards and may not, therefore,
be altered or fitted with non-original parts. The replacement of individual parts is only permitted where these
are of an identical type to the individual parts of the type-tested helmet or have been specifically approved
for replacement by CASCO.
Warning: When wearing another item of personal protection or accessories (with the exception of accessories
supplied by the manufacturer for use with this helmet), a helmet marked as being EN 443 compliant may pos-
sibly no longer comply with all sections of this standard. Reference is to be made to the appropriate information
as stated by the helmet manufacturer.
GUARANTEE
We guarantee your helmet for 24 months during proper use against material or manufacturing faults. CASCO shall
repair, replace or credit the value at its own discretion. Prerequisite for making a claim against the guarantee is the
return of the helmet carriage paid. The helmet may not deviate from its original state and/or be damaged due to
improper use.
MANUFACTURER´S INFORMATION
This documentation contains information on the state of the technology at the time of going to press. We
reserve the right to make technical improvements and deviations to comply with altered standards. Errors
and omissions excepted.
Transmission factor 9% at 586 K source temperature
1500 2000 2500
Transmission factor, high temperature
19