Recording Status; Recording Statistics; Sd Card Status - Sony SNC-EMX Serie Manuel D'utilisation

80 en | Configuration
4.
5.
6.
Holidays
Define holidays whose settings will override the settings for the normal weekly schedule.
1.
2.
3.
4.
5.
6.
7.
Time periods
Change the names of the recording profiles listed in the Time periods box.
1.
2.
3.

Recording status

The graphic indicates the recording activity. An animated graphic is displayed when recording
is taking place.
Activating recording
After completing configuration, activate the recording schedule and start scheduled recording.
Once activated, the Recording Profiles and the Recording Scheduler are deactivated and the
configuration cannot be modified. Stop scheduled recording to modify the configuration.
1.
2.
Click Set to apply the changes.
4.4.5 Recording Status
Details of the recording status are displayed here for information. These settings cannot be
changed.
4.4.6

Recording Statistics

The bit rate of the recorded video (blue) and other data (grey), such as audio and metadata,
are shown in the graphic.
Line
(Only applicable to SNC-HMX cameras)
Identifies the current recording video.
Recording
Identifies the current recording profile (1 or 2).
Zoom
Identifies the current zoom factor of the camera (1x, 2x, 4x, or 8x).
Averaging period
Select the appropriate averaging period as a means of stabilizing the long term bit rate.
4.4.7

SD Card Status

This section identifies the details about the SD card installed in the device:
2019-07 | V01 | DOC
Click Select All to select all of the intervals to be assigned to the selected profile.
Click Clear All to deselect all of the intervals.
When finished, click Set to save the settings to the device.
Click the Holidays tab. Days that have already been defined are shown in the table.
Click Add. A new window opens.
Select the desired From date from the calendar.
Click in the To box and select a date from the calendar.
Click OK to accept the selection which is handled as a single entry in the table. The
window closes.
Assign the defined holidays to the recording profile as described above.
To delete a user-defined holiday, click on the trashcan of the respective holiday.
Click a profile.
Click Rename.
Enter the new name and click Rename again.
Click Start to activate the recording schedule.
Click Stop to deactivate the recording schedule. Recordings that are currently running are
interrupted and the configuration can be modified.
User manual
Network camera
Sony Corporation