Sony SNC-EMX Serie Manuel D'utilisation page 53

54 en | Operation via the browser
Pre-Positions
Six pre-position files can be defined for views generated by the region of interest (ROI)
controls.
1.
2.
3.
4.
Image orientation
(Only applicable to SNC-HMX cameras)
With dewarping on, you can manipulate the image with the mouse.
–
–
–
To see the correct orientation of the image, ensure that the mount position and height have
been filled-in correctly in Configuration >> Camera >> Installer menu >> Positioning.
Digital I/O
(Only applicable to SNC-EMX cameras)
Depending on the configuration of the unit, the alarm input and the output are displayed next
to the image. Expand the Digital I/O group if necessary.
The alarm symbol is for information and indicates the status of an alarm input:
–
The alarm output allows the operation of an external device (for example, a light or a door
opener).
–
Recording status
The hard drive icon
The icon lights up and displays a moving graphic to indicate a running recording. If no
recording is taking place, a static icon is displayed.
Full-screen display
Click the full-screen icon
on the keyboard to return to the normal viewing window.
Saving snapshots
Individual images from the displayed live video stream can be saved locally in JPEG format on
the computer's hard drive. The storage location depends on the configuration of the camera.
–
Recording live video
Video sequences from the displayed live video stream can be saved locally on the computer's
hard drive. The sequences are recorded at the resolution specified in the encoder
configuration. The storage location depends on the configuration of the camera.
2019-07 | V01 | DOC
On the left side of the browser, expand the Pre-positions group if necessary.
Use the ROI controls to define a particular view.
To store this view, click the
– If a pre-position is already stored, a dialog box displays a message. Click OK to
overwrite or Cancel to cancel the operation
To recall a stored pre-position, click a pre-position button.
Place the cursor within the image.
Click an arrow to orientate the image.
Use the scroll wheel to zoom in and out.
The symbol lights when the input alarm is active.
To activate the output, click the checkmark symbol.
– The symbol lights when the output is activated.
below the live camera image changes during an automatic recording.
Click the photo camera icon
icon of one of the six pre-position buttons.
to view the selected stream in full-screen mode; press Esc
to save a single image.
User manual
Network camera
Sony Corporation