Lever Use; Neutral Warm-Up; Trim Operation - Ultraflex B110B Manuel D'installation Et D'entretien

ULTRAFLEX

4 LEVER USE

4.1 Lever use
The lever is kept in a neutral position (vertical);
to unlock it, press the trigger placed under the
handle. The lever stroke is divided into two
movements: in the first phase, 30°, the shift gear
is activated. In the second, 65°, the throttle is
activated. By moving the lever forward the boat
advances, while backwards it proceeds in
reverse.
DANGER
If the control has no neutral safety switch, before
starting the engine make sure that it is in neutral
position.

4.2 Neutral warm-up

Push the central button and, by keeping it pressed, rotate
the lever clockwise or counterclockwise, to warm-up the
engine without moving the boat.
As you return to neutral position, the return spring will bring
the button to initial position.

4.3 Trim operation

The trim allows to adjust the tilt of the engines.
WARNING
If the user has purchased the neutral safety switch + tilt optional (X48
kit), it is necessary to consult the installation and operating instructions
referred to in paragraph 3.5.
page 20
of 67 -
SINGLE LEVER CONTROL B110
Installation and maintenace manual
INV./SHIFT GEAR

