ULTRAFLEX
DANGER
If the check nuts are removed or disassembled, this could cause the single lever control malfunction
as well as damage to people or things.
-
Periodically check the absence of corrosion on the metal parts of the cable terminals and of abrasions
on the sheath.
-
Replace the damaged parts that can compromise the single lever control integrity.
6.2 Extraordinary maintenance
For any information or for assistance with unusual applications please contact our technical support
7 DISMANTLING
7.1 Dismantling
When for any reason, the system is put out of service, it is necessary to follow some rules in order to
respect the environment.
Sheaths, pipelines, plastic or non-metallic components must be disassembled and disposed of
separately.
page 22
of 67 -
SINGLE LEVER CONTROL B110
Technical assistance
personnel (See paragraph "Information letter").
Installation and maintenace manual