Amann Girrbach artex Mode D'emploi page 9

for disinfecting and cleaning light alloys the according
reaction times are listed in the manufacturers' in-
structions for use.
Sterilization must be carried out in an autoclave:
_ 5 min at 134 °C
_ 20 min at 120 °C
PREPARING FOR USE:
a) Bite fork
_ Disinfect in a disinfecting tank or use disinfectant
spray.
_ Remove the registration material from the bite fork.
If a thermoplastic registration material has been
used, it is advisable to place the bite fork in a re-
frigerator. The registration material is then easier
to remove from the bite fork.
_ Sterilize in an autoclave.
b) Nasion with nasion adapter
_ Spray the nasion with disinfectant.
_ Wash off any remaining disinfectant under running
water.
_ May be autoclaved, but is not absolutely essential.
c) Removable porus buttons
_ Unscrew the porus buttons and immerse them in
disinfectant.
_ The porus buttons are best cleaned with a steam
cleaner (Steamer X3 116910). To clean the hole,
hold the nozzle of the steam cleaner in the acoustics
hole and spray it clean.
_ May be autoclaved, but is not absolutely essential.
Accessories/single components:
Order No.:
218609 Porus buttons, long (pair), optional
218680 Leipzig Nasion
218620 Joint Support
218610 Axis plane indicator, optional
217650 Artex Quickbite, 10 pcs.
218690 Vertically adjustable nasion support
Packing List:
Order No.:
218600 Artex Facebow incl.
universal joint
Leipzig nasion
porus buttons "standard", pair
Artex Quickbite, 10 pcs.
tray handle
GB
9