Figure 3-5 Reflect Mount With Mounting Frame And Spacer Bar - Siemens SITRANS F Serie Guide Rapide

①
②
③
④
Figure 3-5
Installation Procedure (See figure 3-7 for reference)
1. On a flat surface, attach the Spacer Bar to a Mounting Frame so that the Reference Hole
2. Slide the second Mounting Frame onto the other end of the Spacer Bar and align the
3. Wrap a Mounting Strap around the pipe. Make sure to position it so there is easy access
4. At the mounting location, place the Mounting Frame/Spacer Bar Assembly on the pipe so
5. Engage the end of the Mounting Strap with the Mounting Strap Adjusting Screw.
6. Slide Mounting Strap under the spring clip of one of the Mounting Frames.
7. Tighten the Mounting Strap Screw enough to take up all of the slack, but not enough to
8. Rotate the assembly on the pipe to the final conditioned location, ensuring that it is
9. Tighten the Mounting Straps to seat the assembly firmly on the pipe. Do not over tighten.
SITRANS FUH1010 Quick Start Guide
Operating Instructions, 1/2009, CQO:QSG009 Rev A
Optional: On larger pipes, multiple lengths of straps
can be linked together to surround pipe
Mounting Strap positioned around Mounting Frame
Transducer shown in the 9 o'clock position on pipe
Mounting Frame
Reflect Mount with Mounting Frame and Spacer Bar
on the Spacer Bar fits over the metal post on the platform of the frame. Tighten the
securing screw.
Number Index Hole with the metal post on the platform. Then tighten the clamping screw.
Ensure that the angled sides of both frames face away from each other.
to the mounting strap adjusting screw.
that it rests on the top of the pipe.
prevent rotation of the assembly.
straight along the pipe axis. (Refer to the transducer orientation diagram in Figure 3-7.)
⑤
⑥
⑦
⑧
Repeat procedure for the other Mounting Frame
Commissioning
3.5 Transducer Installation
Space Bar Platform &
Clamping Screw
Space Bar (Front View)
Metal Post
Mounting Strap Adjusting
Screw
.
27