Navigating The Menu - Siemens SITRANS F Serie Guide Rapide

Quick Terminal Mode Setup
1. Access [HyperTerminal], then select [HyperTerminal.exe].
2. In [Connection Description] dialog box, enter a connection name (e.g. FUS1010). Click
3. In [Phone Number] dialog box, select [Direct to COM 1 (or COM 2)]. Click [OK] to select.
4. In [Properties] dialog box, enter RS-232 parameters. Click [OK].
5. At terminal screen, click [File]. Select [Properties].
6. Select [Settings] tab. At [Emulation] box, select [VT-100].
7. Select [ASCII Setup]. In [ASCII Sending] uncheck boxes. In [ASCII Receiving] check
8. At Terminal screen, type: Menu. Press <ENTER> to access Installation Menu.
Hint: Type: Menu 1000 for longer connection time.
3.3

Navigating the Menu

Installation Menu Navigation
The Installation Menu Chart is a multi-level structure divided into three columns from left to right
Level A - lists the major menu categories.
Level B - list the menu cells associated with Level A. You can enter data into Level B menu cells
Level C - lists the Level B data
Level A
SITRANS FUH1010 Quick Start Guide
Operating Instructions, 1/2009, CQO:QSG009 Rev A
[OK].
[Append line feeds to incoming line ends.]. Click [OK].
Level B
Recall Site Setup
Channel Enable
Create/name Site
Site Security
Delete Site Setup
Save/Rename Site
Commissioning
3.3 Navigating the Menu
Level C
Pump 1
Pump 2
19