Product Components - Hach LS 120 Manuel De L'utilisateur

Figure 1 Product overview
1 Power switch
2 Vibration unit

2.5 Product components

Make sure that all components have been received. If any items are missing or damaged, contact the
manufacturer or a sales representative immediately.
Shipped items:
• LS 120 shaker
• Plug-in power supply unit
• Non-slip mat
Section 3 Installation
Multiple hazards. Only qualified personnel must conduct the tasks described in this
section of the document.
Install the instrument:
• In a clean, dry, level, well ventilated, temperature controlled location that does not receive direct
exposure to sunlight
• In a location where the power switch and power cord are visible and easily accessible
The instrument does not move with the suction cups installed. Make sure that the suction cups are
clean and free from damage. Use the supplied non-slip mat, if the suction cups lose their adhesion
on rough surfaces.
Section 4 Operation
Use only the power supply that is specified for this instrument.
3 Interface for plug-in power supply unit
D A N G E R
N O T I C E
English 5