Use Of Hazard Information; Precautionary Labels; Product Overview - Hach LS 120 Manuel De L'utilisateur

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 33

2.2 Use of hazard information

Indicates a potentially or imminently hazardous situation which, if not avoided, will result in death or
serious injury.
Indicates a potentially or imminently hazardous situation which, if not avoided, could result in death
or serious injury.
Indicates a potentially hazardous situation that may result in minor or moderate injury.
Indicates a situation which, if not avoided, may cause damage to the instrument. Information that
requires special emphasis.

2.3 Precautionary labels

Read all labels and tags attached to the instrument. Personal injury or damage to the instrument
could occur if not observed. A symbol on the instrument is referenced in the manual with a
precautionary statement.
This symbol, if noted on the instrument, references the instruction manual for operation
and/or safety information.
This symbol indicates that a risk of electrical shock and/or electrocution exists.
Electrical equipment marked with this symbol may not be disposed of in European
domestic or public disposal systems. Return old or end-of-life equipment to the
manufacturer for disposal at no charge to the user.

2.4 Product overview

The manufacturer is not responsible for any damages due to misapplication or misuse of this
product including, without limitation, direct, incidental and consequential damages, and disclaims
such damages to the full extent permitted under applicable law. The user is solely responsible to
identify critical application risks and install appropriate mechanisms to protect processes during a
possible equipment malfunction.
Do not use the instrument in residential areas and areas with a low-voltage power supply.
The LS 120 shaker is used in laboratories to shake and homogenize cuvette tests. The vibration unit
can shake up to 8 locked vials simultaneously. The ports are labeled 1–8. The cycle time of a
shaking process is 2 minutes. Refer to
4 English
D A N G E R
W A R N I N G
C A U T I O N
N O T I C E
N O T I C E
N O T I C E
Figure
1.

Publicité

Table des Matières
loading

Table des Matières