70 Appendix A Specifications And Regulatory Information; Fax Accessory Product Specifications; Replacement Parts And Accessories - HP LaserJet MFP Analog Fax Accessory 300 Guide

Fax accessory product specifications

Environmental specifications
Operating environment
Storage environment
Fax specifications
Fax compatibility
Phone connector
Compression methods
Transmission speeds and
standards supported
Modem speed
Speed dialing
Fax resolution,
(send and receive)

Replacement parts and accessories

You can obtain replacement parts for the fax accessory by contacting
your sales representative or your Hewlett-Packard dealer.

70 Appendix A Specifications and regulatory information

Temperature: 10 to 32.5° C (50 to 91° F)
Relative Humidity: 20 to 80 percent (no condensation)
Temperature: -20° C to 40° C (-4° F to 104° F)
Relative Humidity: Less than 95 percent (no condensation)
CCIT/ITU-T Group 3, EIA/TIA Class 1, Class 2.1
RJ11
MH, MR, MMR, and JBIG
V.17 14,400, 12,000, 9,600, 7,200 bps
V.33 at 14,400, 12,000 bps
V.29 at 9,600, 7,200 bps
V.27ter at 4,800 and 2,400 bps
V.34 at 16,800, 19,200, 21,600, 24,000, 26,400, 28,800,
31,200, 33,600 bps
Up to 33.6K bits per second (bps)
Yes
Standard - 200 by 100 dots per inch (dpi)
Fine - 200 by 200 dpi
Superfine - 300 by 300 dpi
Ultrafine - 200 by 400 (receive only)
Ultrafine - 400 by 400 (receive only)
ENWW