HP LaserJet MFP Analog Fax Accessory 300 Guide page 70

Problem
The header is being
appended to the top of
the page when I have
overlay enabled.
Have a mix of names
and numbers in the
recipients box.
My fax call report prints
at unwanted time, even
when Schedule Printing
of Faxes is on.
My one page fax prints
as two pages.
Document stops
feeding in the middle
of faxing.
The volume for sounds
coming from the fax
accessory is too high or
too low.
62 Chapter 6 Troubleshooting
Cause
The fax will append the
overlay header to the top of a
page when overlay is set,
when the fax has been
forwarded.
This is normal for both names
and numbers to appear,
depending on where they are
from, the phone book lists
names, and all other data
bases list numbers.
Schedule Printing of Faxes
does not control printing of
the fax call report, the fax call
report settings need to be
changed.
The fax header is being
appended to the top of the
fax, pushing text to a second
page.
There may be a jam in the
ADF.
The volume setting needs to
be adjusted.
Solution
This is normal operation.
Normal, no action required.
Specify when to print a fax call
report, see "To schedule fax call
report printing" on page 54.
If you want your one page fax to
print on one page, set the overlay
header to overlay mode, see
"Setting the overlay header
(outgoing faxes)" on page 38.
If there is a jam, see the MFP user
guide for instructions on clearing
jams.
See "Setting the modem volume"
on page 36 and "Setting the ringer
volume" on page 36 for information
on changing the sound volume
settings.
ENWW