Table des Matières
Publicité
ENGINE REMOVAL
EC4M5000
ASSEMBLY AND INSTALLATION
Engine installation
1. Install:
• Engine 1
Install the engine from right side.
• Pivot shaft 2
• Engine mounting bolt (lower) 3
• Lower engine bracket 4
• Bolt (lower engine bracket) 5
• Patch 6
• Engine mounting bolt (front) 7
• Upper engine bracket 8
• Bolt (upper engine bracket) 9
• Engine mounting bolt (upper) 0
• Lower engine guard A
• Bolt (lower engine guard) B
NOTE:
• Apply the molybdenum disulfide grease on
the pivot shaft.
• Install the patch with the claw a facing out-
side the chassis.
Brake pedal
1. Install:
• Spring 1
• Brake pedal 2
• O-ring 3
• Bolt (brake pedal) 4
• Clip 5
NOTE:
Apply the lithium soap base grease on the bolt,
O-rings and brake pedal bracket.
Drive sprocket
1. Install:
• Drive sprocket 1
• Drive chain 2
NOTE:
Install the drive sprocket together with the
drive chain.
4 - 87
ENG
85 Nm (8.5 m · kg, 61 ft · lb)
53 Nm (5.3 m · kg, 38 ft · lb)
38 Nm (3.8 m · kg, 27 ft · lb)
53 Nm (5.3 m · kg, 38 ft · lb)
55 Nm (5.5 m · kg, 40 ft · lb)
55 Nm (5.5 m · kg, 40 ft · lb)
10 Nm (1.0 m · kg, 7.2 ft · lb)
26 Nm (2.6 m · kg, 19 ft · lb)
Publicité
Table des Matières
