Table des Matières
Publicité
KICK SHAFT AND SHIFT SHAFT
3. Install:
NOTE:
Slide the spring guide into the kick shaft, make
sure the groove a in the spring guide fits on
the stopper of the torsion spring.
4. Install:
NOTE:
• Apply the molybdenum disulfide grease on
• Apply the engine oil on the kick shaft.
• Slide the kick shaft assembly into the crank-
5. Hook:
NOTE:
Turn the torsion spring clockwise and hook
into the proper hole a in the crankcase.
Kick idle gear
1. Install:
NOTE:
• Apply the engine oil on the kick idle gear
• Install the kick idle gear with its depressed
4 - 79
• Spring guide 1
• Kick shaft assembly 1
• Washer 2
the contacting surfaces of the kick shaft stop-
per a and kick shaft ratchet wheel guide 3.
case and make sure the kick shaft stopper a
fits into the kick shaft ratchet wheel guide.
• Torsion spring 1
• Kick idle gear 1
• Washer 2
• Circlip 3
inner circumference.
side a toward you.
ENG
Publicité
Table des Matières
