Table des Matières
Publicité
FRONT FORK COMPRESSION DAMPING FORCE
ADJUSTMENT
Extent of adjustment
Maximum
Fully turned in
position
• STANDARD POSITION:
This is the position which is back by the spe-
cific number of clicks from the fully turned-in
position.
Standard position:
8 clicks out
* 11 clicks out
* For EUROPE
CAUTION:
Do not force the adjuster past the minimum
or maximum extent of adjustment. The
adjuster may be damaged.
WARNING
Always adjust each front fork to the same
setting. Uneven adjustment can cause poor
handling and loss of stability.
FRONT FORK COMPRESSION DAMPING
FORCE ADJUSTMENT
1. Adjust:
• Compression damping force
By turning the adjuster 1.
Stiffer a → Increase the compression
damping force. (Turn the adjuster 1
in.)
Softer b → Decrease the compression
damping force. (Turn the adjuster 1
out.)
3 - 34
INSP
ADJ
Minimum
20 clicks out (from
maximum position)
Publicité
Table des Matières
