Commissioning - Only For Experts; Engineer's Settings - Only For Experts; Carrying Out Settings In The Engineer's Menu - Harvia sentiotec wave.com4 touch II Instructions De Montage Et Mode D'emploi

8 Commissioning – only for experts
Check that all modules used are correctly connected.
Check whether all jumpers are correctly set on the individual devices. Changes to jumpers are not
recognised when the network voltage is applied.
The individual modules of the wave.com4 touch operating element are recognised automatically after
application of network voltage.
The modules recognised are displayed in the display by their respective menu points. See engineer's settings
and operating instructions for the user.
9 Engineer's settings – only for experts
The final configuration of the overall system is undertaken in the engineer's settings. The available
options are specified by the connected modules.
Please observe the operating instructions for users section (display and operating elements)

9.1 Carrying out settings in the engineer's menu

The control is activated by a long press on OK 1
and the home screen with the available settings
options is displayed. The engineer's menu is
activated by a long press on the C button 2.
Navigate to the 'Engineers' menu point with the
touch wheel 4. Confirm with the OK button 3.
Module settings can now be made here.
To select a menu point, navigate to the option to
be changed with the touch wheel 4 and select
this with OK 3. Press C 2 to go back a level.
WORLD OF WELLNESS
Instructions for installation and use – only for experts
11
7
8
9
Front glass operating & display elements
P. 11/22
1
10
EN
2
4
3
5
6