Installation Of The Operating Element - Harvia sentiotec wave.com4 touch II Instructions De Montage Et Mode D'emploi

Instructions for installation and use – only for experts P. 6/22
5

Installation of the operating element

Dimensions
A cut-out of 213 mm x 82 mm must be provided for the installation of the wave.com4 touch operating element,
into which the installation frame B is installed. In order to affix the frame, bend the brackets 'C' with a
screwdriver as illustrated in the Figure. The installation depth of the wave.com4 touch operating element is 36
mm.
Assembly of installation frame
Installation of the operating element into the installation frame
After wiring, (see wiring section) install the operating element A into frame B as in the Figure.
WORLD OF WELLNESS