Kenwood KAX980ME Instructions page 3

This appliance conforms to EC
l
Regulation 1935/2004 on materials
and articles intended to come into
contact with food.
This attachment features the Twist
Connection System
designed to fit directly on the
latest generation Kenwood Chef
models (identified as KVC, KVL
and KCC series).
This attachment can also fit KMix
kitchen machines featuring a
slow speed attachment outlet
(KMX series).
To check that this attachment
is compatible with your kitchen
machine you will need to ensure
both components feature the
Twist Connection System
If your kitchen machine features
the Bar Connection System
you will also need an adaptor
before operation is possible. The
reference code for the adaptor is
KAT001ME. For more information
and how to order the adaptor visit
www.kenwoodworld.com/twist.
before using for the first
time
Wipe clean with a damp cloth. Do
l
not immerse in water.
key
a flat pasta attachment
b adjustable thickness knob
c cleaning brush
to assemble
1 Lift off the slow speed outlet cover
1.
2 With the attachment in the position
shown, locate to the slow speed
outlet and rotate to lock in place
2.
136794 Iss 1 KAX980ME_KAX984ME multi.indd 3
to use your pasta
maker
1 Make your pasta dough. Follow
one of the dough recipes supplied.
2 Set the adjustable knob on the
and is
side of the pasta attachment to
number 0 by pulling the knob out
and turning.
3 Flatten a piece of dough to
approximately 1 cm thick and
sprinkle some flour between the
rollers.
4 Turn the kitchen machine to
speed 1 (you will see the rollers
turning).
5 Pass the piece of dough through
the rollers repeating until you get
a smooth surface. (Folding the
dough in half across its width or
.
length between rollings will help to
achieve this).
6 Adjust the knob progressively from
0 to 9, each time re-feeding the
dough through the attachment
to achieve the desired thickness
3 (refer to pasta sheet thickness
chart). Pasta thickness using
settings 5 to 7 is recommended.
7 Cut the rolled pasta into desired/
manageable pieces.
Use as required.
Pasta Sheet Thickness Chart
Adjustable Knob
3
Pasta Sheet
Thickness
Setting
(approximate)
No. 0 ~4.8mm
No. 1 ~3.8mm
No. 2 ~3.3mm
No. 3 ~2.5mm
No. 4 ~1.9mm
No. 5 ~1.5mm
No. 6 ~1.2mm
No. 7 ~1.0mm
No. 8 ~0.8mm
No. 9 ~0.6mm
06/06/2017 16:51