Periodical Maintenance Checks - NSK Ti-Max Z-SG45L Manuel D'opération

CAUTION
• Keep the product in suitable atmospheric pressure, temperature, humidity, ventilation, and sunlight. The air should be free from dust, salt and
sulphur.
• Do not touch the product immediately after autoclaving as it will be very hot and must remain in a sterile condition.
• Autoclave sterilization is recommended for the product. The validity of other sterilization methods is not confirmed.
NOTICE
• NSK recommends Class B sterilizers as stated in EN 13060.

9. Periodical Maintenance Checks

Perform periodical maintenance checks every three months, referring to the check sheet below. If any abnormalities are found, contact your Authorized
NSK Dealer.
Points to check
Head cap is loose
Rotation
Check that the Head Cap is firmly tightened.
Rotate the handpiece and check for abnormalities such as abnormal rotation, vibration, noise, and overheating.
Details
21