Remote Controller - JVC KD-LX100 Manuel D'instructions

Remote controller

1
2
3
4
1 • Turns on the unit if pressed when the unit is
turned off.
• Turns off the unit if pressed and held until "SEE
YOU" appears on the display.
• Drops the volume level for a moment if pressed
briefly.
Press again to resume the volume.
2 • Functions as the BAND button while listening
to the radio.
Each time you press the button, the band
changes.
• Functions as the DISC + button while listening
to the CD changer.
Each time you press the button, the disc
number increases, and the selected disc starts
playing.
• Does not function as the PROG button.
3 • Functions as the PRESET button while
listening to the radio.
Each time you press the button, the preset
station number increases, and the selected
station is tuned in.
5
• Functions as the DISC – button while listening
6
to the CD changer.
Each time you press the button, the disc
number decreases, and the selected disc
7
starts playing.
4 Functions the same as the control dial on the
main unit.
NOTE: This button does not function for the
5 Selects the sound mode.
Each time you press SCM (Sound Control
Memory), the mode changes.
6 Selects the source.
Each time you press FUNC (function), the
source changes.
7 • Searches stations while listening to the radio.
• Fast-forwards or reverses the track if pressed
and held while listening to a CD.
• Skips to the beginning of the next track or goes
back to the beginning of the current (or
previous) track if pressed briefly while listening
to a CD.
preferred setting mode adjustment.
5