Selecting Cd Playback Modes - JVC KD-LX100 Manuel D'instructions

To go to a particular disc directly
Press the number button corresponding to the disc
number to start its playback (while the CD changer
is playing).
• To select a disc number from 1 – 6:
Press 1 (7) – 6 (12) briefly.
• To select a disc number from 7 – 12:
Press and hold 1 (7) – 6 (12) for more than 1
second.
Track number
Disc number
Ex. When disc number 3 is selected
To show the CD Text information
This is possible only when connecting a JVC CD
automatic changer equipped with CD Text
reading capability.
See "Playing a CD Text" on page 13.
24
Elapsed playing time

Selecting CD playback modes

• There is a time limit in doing the following
procedure. If the setting is cancelled before you
finish, start from step 1 again.
To play back tracks at random (Random
Play)
1
Press MODE while playing a CD.
"MODE" appears on the display.
Within
5 seconds
2
Press RND (random), while "MODE" is still on
the display, so that the RND indicator lights up
on the display.
Each time you press the button, CD random play
mode changes as follows:
RND1
(Random1)
Canceled
RND
Mode
Indicator
RND1 Lights
RND2 Flashes
RND2
(Random2)
Plays at random
All tracks of the current
disc, then the tracks of
the next disc, and so on.
All tracks of all discs
inserted in the
magazine.