Cd Operations; Playing A Cd - JVC KD-LX100 Manuel D'instructions

Playing a CD

1
Open the loading slot.
The display panel moves down, and the
loading slot appears.
2
Insert a disc into the loading slot.
Total track number of
the inserted disc
Current track
SCM MONO
7 8
SEL DISP MODE
The unit draws in a CD,
the display panel
moves up, and CD play
starts automatically.
The CD indicator lights up.
Total playing time of the
inserted disc
Elapsed playing time

CD OPERATIONS

KD-LX100
LOCAL INT RPT RND
9 10 11 12
SOURCE BBE BAND OFF
Notes:
• When a CD is in the loading slot, selecting "CD"
as the source by pressing SOURCE starts CD play.
• When a CD is inserted upside down, the CD
automatically ejects. ("CD EJECT" appears on the
display.)
• When you play a CD Text, the disc title and
performer appear on the display. Then the current
track title appears on the display, followed by the
track number and elapsed playing time. See also
"Playing a CD Text" (page 13) and "To select the
scroll mode – SCROLL" (page 19).
If a CD Text includes much text information, some
may not appear on the display.
• If you change the source, CD play also stops
(without ejecting the CD).
To stop play and eject the CD
Press OFF/0 briefly.
CD play stops, the display panel moves down,
then the CD automatically ejects from the loading
slot.
To move up the display panel, press
4
. If no button is pressed, the display
panel will move up in about 5 minutes.
CAUTION: NEVER insert your finger between
the display panel and the unit, as it
may get caught in the unit.
Note:
If the ejected disc is not removed for about 15
seconds, the disc is automatically inserted again into
the loading slot to protect it from dust. (CD play will
not start this time.)
¢ or
11