Accessories; Protecting The Environment - Black & Decker KA1000 Traduction Des Instructions D'origine

ENGLISH
Fitting and removing the dust cassette
(fi g. H)
Slide the dust cassette (2) onto the tool and
♦
make sure that it is securely located.
To remove the dust casette, pull it to the rear
♦
and off the tool.
Use
Warning! Let the tool work at its own pace. Do not
overload.
Switching on and off
To switch the tool on, set the on/off switch (1)
♦
to position I.
To switch the tool off, set the on/off switch to
♦
position O.
Emptying the dust cassette (fi g. H)
The dust cassette should be emptied every 10
minutes of use.
While holding the tool, pull the dust cassette
♦
(2) to the rear and off the tool.
Remove the cassette door (13).
♦
Shake the door (13) and dust cassette (2) to
♦
empty the contents.
Refi t the door (13) and dust cassette (2) onto
♦
the tool.

Accessories

The performance of your tool depends on the
accessory used.
BLACK+DECKER and Piranha accessories are
engineered to high quality standards and designed
to enhance the performance of your tool. By using
these accessories you will get the very best from
your tool.
Maintenance
Your tool has been designed to operate over a long
period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon
proper tool care and regular cleaning.
Warning! Before performing any maintenance,
switch off and unplug the tool.
Regularly clean the ventilation slots in your tool
♦
using a soft brush or dry cloth.
Regularly clean the motor housing using
♦
a damp cloth. Do not use any abrasive or
solvent-based cleaner.
36
Mains plug replacement (U.K. & Ireland
only)
If a new mains plug needs to be fi tted:
Safely dispose of the old plug.
♦
Connect the brown lead to the live terminal in
♦
the new plug.
Connect the blue lead to the neutral terminal.
♦
Warning! No connection is to be made to the earth
terminal.
Follow the fi tting instructions supplied with good
quality plugs.
Recommended fuse: 5 A.

Protecting the environment

Separate collection. This product must
not be disposed of with normal household
waste.
Should you fi nd one day that your
BLACK+DECKER product needs replacement, or
if it is of no further use to you, do not dispose of it
with household waste. Make this product available
for separate collection.
Separate collection of used products and
packaging allows materials to be recycled
and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the
demand for raw materials.
Local regulations may provide for separate
collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
BLACK+DECKER provides a facility for the
collection and recycling of BLACK+DECKER
products once they have reached the end of their
working life.
To take advantage of this service please return
your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest
authorised repair agent by contacting your local
BLACK+DECKER offi ce at the address indicated in
this manual. Alternatively, a list of authorised
BLACK+DECKER repair agents and full details of
our after-sales service and contacts are available
on the Internet at: www.2helpU.com