Technical Safety - Miele HS08 Instructions D'utilisation

Masquer les pouces Voir aussi pour HS08:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

en - IMPORTANT SAFETY INSTRUCTIONS

Technical safety

Before using the vacuum cleaner and its accessories,
check for any visible signs of damage. Do not use a dam-
aged appliance.
Ensure that the connection data on the data plate of the
vacuum cleaner (voltage and frequency) match the mains
electricity supply exactly. Without modifications, the vac-
uum cleaner is suited for 50Hz or 60Hz.
The electrical outlet must be fitted with a 15 A fuse.
Reliable and safe operation of this vacuum cleaner can
only be assured if it has been connected to the electricity
supply.
While the vacuum cleaner is under warranty, repairs
should only be performed by a Miele-authorized service
technician. Otherwise the warranty will be void.
Do not pull or carry the vacuum cleaner by the power
cord, and be careful not to damage the cord when with-
drawing the plug from the socket. Keep the cord away
from sharp edges and do not let it get pinched, for exam-
ple, under a door. Avoid running the vacuum cleaner over
the cord. This could damage the cord, plug or socket. The
appliance must not be used if any of these have suffered
damage.
Do not use the vacuum cleaner if the power cord is
damaged. If the cord is damaged it must be replaced with
an original Miele cord. For safety reasons, this work must
only be performed by the Miele Service Department or a
Miele-authorized service technician.
7

Publicité

Chapitres

Table des Matières
loading

Table des Matières