General Settings - Psm; Basic Procedure - JVC KD-AR760 Manuel D'instructions

General settings — PSM

Basic procedure

You can change PSM (Preferred Setting Mode)
items listed (except for SID) in the table that
follows.
1
2
Select a PSM item.
Ex.: When you select "DIMMER MODE"
Indications
DEMO MODE
Display demonstration
CLOCK HOUR
Hour adjustment
CLOCK MINUTE
Minute adjustment
CLOCK DISP
Clock display
20
Selectable settings, [reference page]
DEMO ON:
[Initial]; Display demonstration will be activated
automatically if no operation is done for about
20 seconds, [8].
DEMO OFF: Cancels.
1 – 12, [8]
[Initial: 1 (1:00)]
00 – 59, [8]
[Initial: 00 (1:00)]
CLK DISP ON: [Initial]; Clock display is shown on the lower part
of the display.
CLK DISP OFF: Current source indication (ex. station band, disc
number, etc.) is shown on the lower part of the
display.
• Pressing DISP repeatedly will show the other information for about
5 seconds.
3
Adjust the PSM item selected.
4
2
Repeat steps and
other PSM items if necessary.
5
Finish the procedure.
3
to adjust the