Safety - Toro 78463 Manuel De L'opérateur

Masquer les pouces Voir aussi pour 78463:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Safety

Become familiar with the safe operation of the
equipment, with the operator controls, and safety
signs.
Use extra care with grass catchers or other
attachments. These can change the operating
characteristics and the stability of the machine.
Follow the manufacturer's recommendations
for adding or removing wheel weights or
counterweights to improve stability.
Do not use a grass catcher on steep slopes. A
heavy grass catcher could cause loss of control
or overturn the machine.
Slow down and use extra care on hillsides. Be
sure to travel in the recommended direction on
hillsides. Turf conditions can affect the stability of
the machine. Use extreme caution while operating
near drop-offs.
Keep all movement on slopes slow and gradual.
Do not make sudden changes in speed, direction,
or turning.
The grass catcher can obstruct the view to the
rear. Use extra care when operating in reverse.
Use care when loading or unloading the machine
into a trailer or truck.
Never operate with the discharge deflector raised,
removed or altered, unless using a grass catcher.
Keep hands and feet away from moving parts. Do
not make adjustments with the engine running.
Park the machine on a level surface, disengage
the drives, shut off the engine, leave the operator's
position, and chock the wheels before performing
any task such as emptying the grass catcher or
unclogging the chute.
If you remove the grass catcher, be sure to install
any discharge deflector or guard that might have
been removed to install the grass catcher. Do not
operate the mower without either the entire grass
catcher or the grass deflector in place.
Shut off the engine before removing the grass
catcher or unclogging the chute.
Do not leave grass in the grass catcher for
extended periods of time.
Grass catcher components are subject to wear,
damage and deterioration, which could expose
you to moving parts or allow objects to be thrown.
Frequently check components and replace with
the manufacturer's recommended parts, when
necessary.
4

Publicité

Table des Matières
loading

Table des Matières