Toro 78463 Manuel De L'opérateur page 19

10. Ensure that the blade bolt is torqued to 75 to 81
N∙m (55 to 60 ft-lb).
11. Install the mower belt around the lower pulley of
the double pulley
1. Lower pulley
12. Install the belt-cover bracket to the mower deck
using 2 carriage bolts (1/4 x 3/4 inch) and 2
locknuts (1/4 inch) as shown in
13. Install the speed nut onto the belt-cover bracket
(Figure 22).
1. Carriage bolt (1/4 x 3/4
inch)
2. Belt-cover bracket
14. Install the mower deck belt around the
spring-loaded idler pulley
(Figure 21).
Figure 21
2. Mower belt
Figure
Figure 22
3. Speed nut
4. Locknut (1/4 inch)
(Figure 18).
g341575
22.
g038112
17