Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

AC Adapter Installation:
Plug one end of the AC Adapter (40) into the power jack of the Power Supply Wire(56)on the back
of the Left Shroud. Before plugging in,make sure to check carefully the specifications on the Adapter.
Plug the other end of the AC Adapter (40) into the electrical wall outlet.
Program select and setting value
1. Use the UP or DOWN keys to select program mode and then press ENTER to confirm your exer
cise mode.
2. At the Manual mode, the computer will use the UP or DOWN keys to set up your exercise TIME,
DISTANCE, CALORIES, PULSE.
3. Press the START/STOP key to start exercise.
4. When you reach the target, the computer will produce beep sounds and then stop.
5. If you set up more than one target and you would like to reach next target, press START/STOP
key to keep on exercise.
Wake-Up Function
The monitor will entry SLEEP mode (LCD off) when there is no signal input and no key be pressed
after 4 minutes. Press the screen to start the monitor.

5. BEFORE YOU START

49

Publicité

Table des Matières
loading

Table des Matières