Troubleshooting - SPORTSTECH CX640 Manuel De L'utilisateur

15. TROUBLESHOOTING

PROBLEM
The elliptical trainer wobbles when in
use.
There is no display on the computer
console.
There is no heart rate reading or
heart rate reading or is erratic /
inconsistent.
The elliptical trainer makes a squea-
king noise when in use.
SOLUTION
Turn the rear stabilizer end cap on the rear
stabilizer as needed to level the elliptical
trainer.
Remove the computer console and verify the
wires that come from the computer console
are properly connected to the wires that come
from the front post.
Check if the batteries are correctly positioned
and battery springs are in proper contact with
batteries.
The batteries in the computer console may be
dead. Change to new batteries.
Make sure that the wire connections for the
hand pulse sensors are secure.
To ensure the pulse readout is more precise,
please always hold on to the handlebar grip
sensors with two hands instead of just with
one hand only when you try to test your heart
rate figures.
Gripping the hand pulse sensors too tight. Try
to maintain moderate pressure while holding
onto the hand pulse sensors.
The bolts may be loose on the elliptical trainer,
please inspect the bolts and tighten the loose
bolts.
62