MBM MC201E Manuel D'utilisation Et De Maintenance page 32

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
In order to ensure optimum cleaning results without the risk of chemical attack we recommend using our cleaning chemical BK101. Other
¨
products can be used. Generally cleaning products that are compatible with our ovens should:
- have a composition based on potassium hydroxide with a concentration < 25%, WITHOUT sodium hydroxide
- be suitable for use at a temperature of 60°C.
- include anticorrosion agents
¨
For maximum efficiency of the descaling product without damaging the material and components of the oven, you should use an appropriate
descaler. The use of certain acids has an irreversible destructive effect that may cause significant damage. The descaling product must contain
corrosion inhibitors to prevent metal attack. It must also comply with legal requirements, in particular for material intended to come into contact
with foodstuffs.
Chemical products containing nitric acid are strictly prohibited. Recommended composition:
- Phosphoric acid <50%
- Corrosion inhibitor
¨
The automatic cleaning system is exclusively designed to achieve an introduction of cleaning and degreasing chemical. Never use a descaling
agent. This would damage the hydraulic system of the oven irreversibly.
Under no circumstances should the oven be cleaned with grills or containers in situ.
¨
The core probe socket and USB port are fitted with silicone protective covers.
¨
- Always put the protective cover in place (lowered to protect connections) whenever the socket is not in use.
- Never "clean" connections with a water hose or a sponge. (If the silicone cover is used and put back in place after use,
The manufacturer certifies that the packaging meets the provision 94/62/CE (relating to packaging and packaging waste of 20.12.94) and
¨
3B-390977NU – 10/18
requests that the final installer (or user) observes the rules relating to the removal of the packaging (recycling or reuse).
« According to article 6 of the decree of 20 July 2005 a marking giving the identity of the manufacturer and the market release date must appear
¨
on equipment after 13 August 2005».
« The Manufacturer has filled in the National Register. »
¨
As per the legal provisions in force (article 21 & 22 of the decree 2005-829), the customer is responsible for the obligations relating to the
elimination of electric and electronic waste, namely:
- he is to deal with selective treatment, reconditioning and destruction of residue arising from electric and electronic equipment, selectively
collected in the installations meeting the technical requirements or in any other installation authorised for the purpose, in another member
State of the European Union, or in another State so far the transfer of these residues out of France is made according to the provisions of
the Regulation of 1st February 1993 indicated above.
- he must make sure that all fluids of electric and electronic equipment are drained according to the requirements of the provisions.
- he must make sure that the information relating to the removal and treatment of these residues is forwarded to any further acquirer.
The warranty will not cover problems caused by failure to comply with these recommendations
¨
Warning! Danger! Caution!
¨ Cooking appliances may reach 250°C. BE CAREFUL not to burn yourself when using or handling INNER ACCESSORIES (Plates,
modules, filter, duct...).
¨ The surface temperature of the door can exceed 60°C. BEWARE OF THE RISK OF BURNS.
¨ Loading and unloading containers and ovenware: The height of the top shelf or runner can be 1.75 m. If unloading manually be careful.
ATTENTION: splashes and spillages pose a risk of scalding.
¨ When using the core probe be aware that it can be very hot, always use suitable protection to avoid burns
¨ Remember the dangers identified on the safety data sheet for detergent
- Harmful if swallowed.
- Can result in serious burns.
- Irritates the eyes.
- Irritates the respiratory tracts.
- Risk of serious eye lesions.
¨ Danger of irritation to the skin and eyes or acid burns.
Detergents will cause irritation and possible burns if in direct contact with the skin or eyes.
- Do not inhale the mist or spray
- Avoid direct contact with these products
- Never open the oven door during the automatic cleaning cycle
- Wear protective clothing, gloves and hermetic protective goggles in accordance with the safety data sheet.
¨ Remember the safety advice provided by the safety data sheet for each detergent
- Do not each or drink when using these products.
- Do not inhale their vapours.
- If case of contact with eyes rinse immediately with plenty of water and seek medical advice.
- Wear appropriate protective clothing, gloves and face and eye protective gear.
- In the event of an accident or sickness seek immediate medical attention
- Dispose of the product and its container as hazardous waste.
Instructions for use
Dispose of this product in accordance with the national legislation or other regulations in force in your
PLEASE NOTE THAT NO GUARANTEE IS UNCONDITIONAL
country for the treatment of used electrical and electronic equipment.
Our guarantee applies only for normal use. That is, with the strict observance of the recommendations given in our instructions for use and
Note: To do this, contact an appropriate collection point for the recycling of electrical and electronic
maintenance.
equipment for treatment, recovery and recycling in accordance with national legislation.
It will only be valid on condition that the periodical maintenance recommended has been carried out by factory trained engineers.
All appliances are, subject to the above limitations, normally guaranteed for a period of one year, from the date invoice. In the event of a
breakdown due to a visible or hidden defect, our equipment will be repaired at our expense, including parts and labour costs.
To benefit from our guarantee, our appliances must not have been modified in any way or repaired using parts which are not genuine and
approved for such use or where repairs have been undertaken by personnel who are not qualified or factory trained.
In case of breakdown or failure we should be informed in writing at the earliest opportunity of the nature of the problem. In no
circumstances should the defect be remedied by the user or a third party.
Regular service inspections and maintenance by our engineers are an essential condition for correct and reliable operation of our
equipment. Such service and maintenance operations can and must only be carried out by our technicians, who are not only fully qualified but also
trained to do so. They have the right tooling, original spare parts and are given regular training updates on the appliances. Periodic servicing is
essential; it is carried out at a cost but guarantees reliable operation of our appliances
The timing of service and maintenance is relative to the conditions of use. In the event of heavy use certain operations will need to be
carried out more frequently.
WARNING! Damage caused by connecting our appliances to a power supply which does not comply with the data plate (voltage, reversal
no maintenance is necessary).
PROFESSIONAL KITCHEN EQUIPMENT AT THE END OF THE LIFE CYCLE
Page 15
BONNET GRANDE CUISINE
Rue des Frères Lumière - Z.I Mitry Compans
77292 MITRY MORY Cedex
20 GUARANTEE
- 14 -
EN

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Mc201gMc202eMc202g20 gn 2/120 gn1/1

Table des Matières