Cleaning Menu; Manual Cleaning Menu - MBM MC201E Manuel D'utilisation Et De Maintenance

3B-390977NU – 10/18
There are 4 options:
- Manual cleaning (semi-automatic)
- Automatic cleaning started manually (Automatic wash option)
- Automatic cleaning with a programmed start (Automatic wash option)
- Forced clean (Automatic wash option)

14.1 MANUAL CLEANING MENU

ê
Pressing the Cleaning/Tools button or any
inactive zone exits this menu and returns to the
previous screen.
Procedure:
- Switch the oven on.
- Wait a few seconds until the start screen clears.
- Press the button:
- The manual wash screen appears:
- Then press the "Start" button:
If the temperature is not appropriate for cleaning the temperature display will flash and the oven will heat up or cool down automatically to
reach this temperature. Once this temperature is reached, the display indicates "ProD" and the oven will ring to warn you.
After the alarm has sounded:
- Open the door (without switching the oven off).
- Remove the right hand runners or the oven module (optional).

14 CLEANING MENU

The cavity should never be cleaned with grills or
containers in situ.
Pressing the Cleaning/Tools button gives access to the cleaning menu
è
Display shows "CLEA" (cleaning) in the timer zone and the intensity in the temperature
zone.
By default the last cycle used is displayed.
Options:
- Cleaning
è
- Rinse
Pressing the "Start button" starts a wash cycle.
"Cleaning mode"
è
Semi-automatic cleaning mode
è
"Start" a cleaning cycle.
è
Always wait for the oven to ring before spraying on a cleaning agent.
Page 6
BONNET GRANDE CUISINE
Rue des Frères Lumière - Z.I Mitry Compans
77292 MITRY MORY Cedex
- 6 -
Function Time
- 17 min
Rin 2 min
EN