Testing Operation; Service; Before Calling Service; Single Oven-Side Hinge - Thermador Professional Serie Guide D'installation

Testing Operation

Turn on power at the breaker.
1.
Test the oven mode.
2.
Select the BAKE mode. See the Use and Care Manual
for detailed operation instructions.
Verify that the oven light comes on and the oven
3.
begins to preheat.

Service

Before Calling Service

Do not remove rating label as it may void the product
warranty.

Single Oven-Side Hinge

The rating labels (A) are opposite the door hinge. For left
hinge doors, the rating labels will be on the door trim on
the right hand side of the door. For right hinge doors, the
rating labels will be on the door trim on the left hand side
of the door.
Rating Label Location
A Rating Label
Model Number and FD Number
The model number and the FD number of your appliance
are found on the rating label. Make a note of these
numbers in the space below to save time in the event
your appliance requires service.
Model #
Thermador
Customer Support
Keep your invoice or escrow papers for warranty
validation if service is needed.
16
FD #
800-735-4328
Test the door lock.
4.
Set the SELF CLEAN mode. Confirm that the door
locks when the lock icon appears in the display.
If installing a double oven, test the second oven as
5.
well.
If any of the tests do not result as explained above,
6.
contact service for assistance. Otherwise, the
installation is complete at this time.

Single Oven-Bottom Hinge

The rating labels (A) are located on the left hand side of
the door trim.
Rating Label Location
A Rating Label
Model Number and FD Number
The model number and the FD number of your appliance
are found on the rating label. Make a note of these
numbers in the space below to save time in the event
your appliance requires service.
Model #
Thermador
Customer Support
Keep your invoice or escrow papers for warranty
validation if service is needed.
FD #
800-735-4328