Dimensions For Steam And Convection Oven Units - Thermador Professional Serie Guide D'installation

Dimensions for Steam and Convection
Oven Units
NOTICES
A 2" diameter hole is required to run conduit to the
▯
junction box.
The cabinet base must be flat and capable of
▯
supporting a weight of at least 232 lbs (105 kg).
Under oven dimensions are provided as a general
▯
guideline and may be adjusted as needed based on a
particular application. Consult a design professional
for optimizing personal preferences.
Steam and Convection Oven Wall Mount Installation
Steam and Convection Oven Bottom Hinge
Wall Mount Installation
*For single ovens installed into a wall cabinet, the
junction box may be located above, beneath, left or right
of the unit within range of the power cord.
Steam and Convection Oven Flush Mount Installation
Top View Bottom Hinge Door
Side View Bottom Hinge
Dimensions for Under Counter Installation
*Includes 3/4" (19 mm) base plate.
**For single ovens installed under a cabinet, the junction
box should be located to the right or left of the unit within
range of the power cord.
21