When The Alarm Sounds - Sangean WFR-20 Mode D'emploi

When the alarm sounds

The radio alarm will sound at the selected times for up to 60 minutes
unless cancelled. The volume for the radio alarm will be the same as
the volume previously used when listening to the radio or media player.
If for any reason the radio cannot connect to the requested radio station
at the time that the alarm is due, the buzzer alarm will be used instead.
The buzzer alarm sounds for 10 minutes and the volume will gradually
increase from a low level. If the radio is playing at the time that the
buzzer sounds, then the buzzer volume is based on the radio
volume setting.
1. If the radio alarm sounds when the radio is in standby, the display
will show 'Turn on Radio' with a YES / NO option. If no action is
taken the radio will switch off at the end of the alarm period. If you
select NO, the radio will switch off immediately. If you wish to listen
to the radio, or to be able to select alternative stations, then select
YES using the Select control.
2. If a radio alarm sounds and the radio is already playing, the radio will
change to the station specified for the alarm, and the display will
show 'Stop alarm' with a YES / NO option. Selecting YES will revert
to the previous radio station or the media player. Selecting NO will
allow the radio station from the alarm to continue.
3. If the buzzer alarm sounds when the radio is in standby, the display
will show 'Turn on Radio' with a YES / NO option. If no action is
taken, the buzzer will stop after 10 minutes. If you select NO,
the alarm will switch off immediately. If you wish to listen to the radio
or media player, then select YES using the Select control.
4. If the buzzer alarm sounds when the radio is already playing,
the display will show 'Alarm'. If no action is taken, the buzzer will
stop after 10 minutes. If you wish to go back to the radio station
press the Select control.
49
20070929_WFR-20_381R101-A_GB.p65
2007/10/1, ¤U¤È 05:14
GB
46