Queuing Up Tracks For Playback Later; Controlling Playback - Sangean WFR-20 Mode D'emploi

Queuing up tracks for playback later

1. If you wish to add only particular tracks from an album to the queue,
first choose the album as described in steps 1 - 3 on the preceding
section (section 'Queuing up albums for playback later').
2. Use the Rotary control (or use the Menu up and Menu down buttons
on the remote control) to search for and highlight the required track.
3. Press the Select control (or button). 'Track Added To Queue'will
show on the display.

Controlling playback

1. Press and hold the Play / Pause buttonon the remote control to stop
playback of the current track. If you press and release the button
again, playback will resume from the beginning of the same track
2. Press and release the Play / Pause button to pause playback of the
current track.
If you press and release the button again, playback will resume from
the point where it was paused.
3. Press the Rewind button to start playback of the previous track in
the queue.
4. Press the Fast-forward button to start playback of the next track in
the queue.
35
38
20070929_WFR-20_381R101-A_GB.p65
2007/10/1, ¤U¤È 05:13