Storing A Radio Station In A Preset - Sangean WFR-20 Mode D'emploi

Storing a radio station in a preset

There are 12 memory presets available. All may be accessed using the
rotary control. Additionally, presets 1 -6 may be accessed using the
remote control.
1. Select the required station as previously described.
2. When the radio is playing use the Select control to access the
Radio Stations menu. If needed, use the Back option.
3. In the Radio Stations menu rotate the Select control to display the
preset station list.
4. Scroll through the preset list until you reach the next available preset
(or a preset that you wish to change).
5. Press and hold the Select control until the display shows that the
station has been stored - for example, 'Assigned To Preset 1'.
The station will be stored under this chosen preset. Repeat this
procedure for any other preset memories that you wish to configure.
6. If using the remote control, presets 1 - 6 can be stored by pressing
and holding the required preset button on the remote control without
the need to navigate the radio menus.
23
20070929_WFR-20_381R101-A_GB.p65
2007/10/1, ¤U¤È 05:13
GB
20