Before You Can Use This Product - Sangean WFR-20 Mode D'emploi

Before you can use this product

Before you can use your Internet radio, you must have the following:
A broadband Internet connection.
A wireless access point (Wi-Fi router) or a wired Ethernet connection
(10 or 100 Mbits/sec with LAN connection) connected to your
broadband Internet, preferably via a router. In many cases the
broadband modem, router and wireless access point will be a single
combined unit supplied by your Internet Service Provider or bought
from a computer store.
If your wireless network is configured to use Wired Equivalent Privacy
(WEP) or Wi-Fi Protected Access (WPA) data encryption then you
need to know the WEP or WPA key so you can get the Internet radio
to communicate with the network.
The Internet radio will typically work within a 100 meter radius from
your wireless access point. The actual range achieved will depend upon
the building type, other nearby wireless networks, and possible
interference sources.
IMPORTANT:
Before you continue, make sure that your wireless access point or
router is powered up and working with your broadband Internet service
(use your computer to verify this). To get this part of the system working
you must read the instructions supplied with the wireless access point
or router.
7
10
20070929_WFR-20_381R101-A_GB.p65
2007/10/1, ¤U¤È 05:12