Listening To Previously Broadcast Material - Sangean WFR-20 Mode D'emploi

Listening to previously broadcast material

Some radio stations allow you listen to programmes that have already
been broadcast. When you select a radio station that has this facility,
the station does not start playing immediately, but instead the display
shows the options 'Live' and 'On demand'.
1. Rotate the Select control to highlight 'Live' or 'On Demand'.
2. Press and release the Select control to select:
'Live' - plays the current output from the station as normal.
'On Demand' - lets you listen to previous broadcasts.
The options will depend on the station you have chosen.
3. When you choose 'On Demand', the display shows the names of the
programmes available.
4. Rotate the Select control to highlight the programme that you wish to
listen to. Press the Select control to select the programme.
5. When you have chosen the programme you want to listen to, either it
will start to play, or the display may show a list of days for you to
choose from, or it may show you a playback start time of 00:00.
Note that this is not the time that the original broadcast took place.
It is the time after the start of the programme from which the radio
will start playing. If a start time is displayed, skip to step 7.
6. Rotate the Select control to select the day the programme was
broadcast. Press the Select control to choose the day. The display
will then show a programme start time of 00:00.
25
20070929_WFR-20_381R101-A_GB.p65
2007/10/1, ¤U¤È 05:13
GB
22