Setting The Auxiliary Input Level - Sangean WFR-20 Mode D'emploi

Setting the auxiliary input level

Different audio sources can vary quite significantly in the strength of
the signals which they provide to other equipment such as your
Internet radio. In particular, some headphone outputs are at a much
lower level than others, and almost all headphone outputs are at a
lower level than so called 'Line-level' outputs.
So that you may use your radio with a range of external audio sources,
the input sensitivity of the Auxiliary Input may be configured to suit
either Headphone or Line-level outputs. The Headphone Level setting
is the more sensitive of the two.
1. When the radio is playing press the Select control to access
the menus. If needed, use the Back option to access the main
Mode menu. Rotate the Select control until 'Configure' is highlighted
on the display.
2. Press the Select control to show the Configure menu on the display.
Rotate the Select control until 'Auxiliary input level' is highlighted.
3. Rotate the Select control until either 'Headphone level' or 'Line Input
Level' is highlighted on the display, and then press the Select control
to activate the desired setting.
4. If needed, select the Back option to exit the menu.
43
20070929_WFR-20_381R101-A_GB.p65
2007/10/1, ¤U¤È 05:13
GB
40