Intended Use; Technical Data; Operation; Settings - Festool TS 75 EBQ Notice D'utilisation D'origine

English
CAUTION
The emission values may deviate from the
specified values. This is dependent on how
the tool is used and the type of workpiece
being machined.
► The actual load during the entire operating
cycle must be evaluated.
► Depending on the actual load, suitable pro­
tective measures must be defined in order
to protect the operator.
3

Intended use

Circular saws are designed for sawing wood,
materials similar to wood, gypsum and cement-
bonded fibre materials and plastics. When fitted
with the special saw blades for aluminium that
are offered by Festool, these machines can also
be used for sawing aluminium.
Only use saw blades with the following dimen­
sions:
– saw blades according to EN 847-1
– Saw blade diameter: 210 mm
– cutting width: 2.4 mm to 2.6 mm
– location hole: 30 mm
– standard blade thickness: Max. 1.8 mm
– suitable for speeds of up to 5000 rpm
Never use machine with any abrasive wheels.
This power tool may only be used by experts or
instructed persons.
Festool power tools must only be fitted in
–
worktops that have been provided for this
purpose by Festool. The electric power tool
may become unsafe and cause serious ac­
cidents if installed in benches from other
manufacturers or self-manufactured work
benches.
The user is liable for improper or non-in­
tended use.
4

Technical data

Circular saw
Performance
no-load speed
Inclination
Cutting depth at 0°
Cutting depth at 45°
18
TS 75 EBQ,
TS 75 EQ
1600 W
(110 V version: 13 A)
1350–4400 rpm
0–47°
0–75 mm
0–56 mm
Circular saw
Saw blade measurement
Weight (without power
cable)
5

Operation

WARNING
Unauthorised voltage or frequency.
Risk of accidents
► The mains voltage and the frequency of the
power source must correspond to the
specifications on the machine's name
plate.
► In North America, only Festool machines
with the voltage specifications 120 V/60 Hz
must be used.
CAUTION
Heating of the Plug it connection if bayonet
fitting is not completely locked
Risk of burns
► Before switching on the power tool, make
sure that the bayonet fitting at the mains
cable is closed fully and locked.
Always switch off the machine before
connecting and disconnecting the mains
power cable.
Connecting and disconnecting the mains power
cable - see Fig. [2].
Slide the safety lock [1-8] upwards and
press the on/off switch [1-7] (press =
ON / release = OFF).
Pressing the safety lock unlocks the plunging
mechanism. The saw unit can then be moved
downwards. This causes the saw blade to
emerge from the protective cover.
When the machine is lifted, the saw
unit springs back into its initial posi­
tion.
6

Settings

WARNING
Risk of injury, electric shock
► Always disconnect the mains plug from the
socket before performing any work on the
machine.
TS 75 EBQ,
TS 75 EQ
210 x 2.4 x 30 mm
6.2 kg