Emission Levels; Intended Use; Technical Data; Parts Of The Device - Festool HKC 55 EB Notice D'instructions Originale

English
– Wear protective goggles.
– Connect the power tool to a suitable dust
extractor with an antistatic suction hose.
– Regularly clean dust deposits from the mo­
tor housing on the power tool.
– Use an aluminium saw blade.
– When sawing panels, they must be lubrica­
ted with petroleum, but thin-walled profiles
(up to 3 mm) can be sawed without lubrica­
tion.
2.5

Emission levels

The levels determined in accordance
with EN 62841 are typically:
Sound pressure level
Sound power level
Uncertainty
CAUTION
Noise generated when working
Risk of damage to hearing
► Use ear protection.
Vibration emission level a
three directions) and uncertainty K measured in
accordance with EN 62841:
Sawing wood
Sawing aluminium
The specified emission levels (vibration, noise)
– are used to compare machines.
– They are also used for making preliminary
estimates regarding vibration and noise
load during operation.
– They represent the primary applications of
the power tool.
CAUTION
The emission values may deviate from the
specified values. This is dependent on how
the tool is used and the type of workpiece
being machined.
► The actual load during the entire operating
cycle must be evaluated.
► Depending on the actual load, suitable pro­
tective measures must be defined in order
to protect the operator.
22
L = 96 dB(A)
PA
L = 107 dB(A)
WA
K = 4 dB
(vector sum for
h
a ≤ 2.5 m/s
h
K = 1.5 m/s
a ≤ 2.5 m/s
h
K = 1.5 m/s
3

Intended use

Portable circular saw designed for sawing
– wooden materials and wood-based materi­
als,
– plaster and cement compoud fibres,
– plastic materials,
– aluminium (only with a special saw blade
for aluminium offered by Festool)
Only use saw blades with the following
dimensions:
– Saw blades in accordance with EN 847-1
– Saw blade diameter 160 mm
– Recommended cutting width 1.8 mm, max.
2.2 mm with restricted function of the guide
wedge
– Location hole 20 mm
– Recommended standard blade thickness
1.2 mm, range of 1.1 to max. 1.25 mm pos­
sible
– Suitable for speeds of up to 9500 rpm
Do not use cutting or sanding discs.
Only saw materials for which the saw blade in
question has been designed.
This power tool may only be used by experts or
instructed persons.
The user is liable for improper or non-in­
tended use.
This power tool is suitable for use with
2
BP Festool battery packs of the same voltage
2
class.
2
4

Technical data

2
Cordless circular saw
Motor voltage
Speed (no-load)
Inclination
Cutting depth at 0°
Cutting depth at 50°
Saw blade dimensions
recommended
Weight excl. battery pack
5

Parts of the device

[1-1] Handles
[1-2]
Switch-on lock
HKC 55 EB
14.4–18 V
4500 rpm
0° to 50°
0–55 mm
38 mm
160 x 1.8 x 20 mm
max. 160 x 2.2 x 20 mm
3.4 kg