Emission Levels; Intended Use; Technical Data - Festool DSC-AG 125 FH Mode D'emploi

DSC-AG 125 FH
GB
– Avoid mechanical damage to the diamond tool,
whether it is caused by force, impact or heat.
– Guide the diamond disc vertically into the sec-
tion.
– Always work with an oscillating movement, so
that the disc can cool and to avoid the diamond
disc overloading.
– Allow the equipment to cool after several cuts or
intensive cutting, in order to avoid the diamond
tool overheating.
– Do not use the diamond cutting disc for sanding.
Do not exert any lateral pressure on the diamond
cutting disc.
– Diamond tools are self-sharpening. Reduced
cutting performance and a circular fiery edge in-
dicate a blunt diamond tool. The tool can be
sharpened by making short cuts in an abrasive
material (sand-lime brick, asphalt or aerated
concrete). Sporadic sparks typically occur when
cutting stone. They are therefore not critical.
– Only operate the power tool with a mounted ex-
traction hood and additional handle, unless oth-
erwise specified.
– Do not cut metal objects, nails or screws.
– Wear suitable protective equipment such as ear
protection, safety goggles, a dust mask for work
which generates dust, protective gloves when
working with raw materials and when changing
tools, and sturdy footwear.
– Use suitable detectors to determine if utility
lines are hidden in the work area or call the lo-
cal utility company for assistance. Contact with
electric lines can lead to fire and electric shock.
Damaging a gas line can lead to explosion. Pene-
trating a water line causes property damage or
may cause an electric shock.
– Hazardous or toxic dust may arise when work-
ing (e.g. paint products which contain lead,
some types of wood, etc.). Materials containing
asbestos can only be processed by qualified in-
dividuals. Contact with or inhalation of this dust
may pose a risk for the operating personnel or
individuals in the vicinity. Observe the safety reg-
ulations applicable in your country.
Wear a P2 respiratory mask to protect
your health and use a suitable extractor.
2.3

Emission levels

Levels determined in accordance with EN 60745 are
typically:
18
Sound pressure level
Noise level
Measuring uncertainty allow-
ance
CAUTION
Operating noise
Damage to hearing

Use ear protection!
Vibration emission value a
directions) and uncertainty K measured in accor-
dance with EN 60745:
Vibration emission level (3-axles)
Cutting
The specified emissions values (vibration, noise)
– are used to compare machines.
– They are also used for making preliminary esti-
mates regarding vibration and noise loads during
operation.
– They represent the primary applications of the
power tool.
Increase possible for other applications, with other
insertion tools or if not maintained adequately. Take
note of idling and downtimes of machine!
3

Intended use

Consisting of an angle grinder and extraction hood,
the Dia cutting system is designed for grooving and
cutting into concrete or stone materials and tiles
without the use of water.
The extraction hood can only be operated with orig-
inal Festool or Protool angle grinders D 125.
The user is liable for improper or non-in-
tended use.
4

Technical data

Dia cutting system DSC-AG 125 FH
Extraction hood
Tool diameter
Disc thickness
Cutting depth
Extractor hose diameter
Weight
L = 90 dB(A)
PA
L = 101 dB(A)
WA
K = 3 dB
(vector sum for three
h
a = 4,0 m/s
h
K = 1,5 m/s
DCC-AG 125 FH
125 mm
max. 6,5 mm
27 mm
27/36 mm
0,6 kg
2
2