Setting The Alarm Time And Alarm Day - Auriol AFW 2 A1 Mode D'emploi

NOTE
► If you are currently in a country in which the DCF signal
is still being received but the current time zone is different,
you can use the time zone settings to set the radio weather
station to the current time in your country .
► If you are in a country in which the local time is one hour
ahead of central European Time (CET) you should set
the time zone to . The radio weather station is still being
controlled by the DCF signal but will display the time as
one hour in advance of CET .

Setting the alarm time and alarm day

♦ Press the ALARM button 8 to access alarm mode .
The current alarm time set and the display for the alarm
( )
mode
♦ Press and hold the ALARM button 8 for around 3 seconds .
The hour display blinks .
Press the – /CH button 6 or the +/MEM button 7 to set
♦
the required value .
♦ Press the ALARM button 8 to confirm your entry . The
minute display blinks .
Press the – /CH button 6 or the +/MEM button 7 to set
♦
the required value .
♦ Press the ALARM button 8 to confirm your entry . The
alarm symbol
that the alarm function is active . In addition, the display for
the alarm day ( ) flashes on the date panel 1 .
AFW 2 A1
are shown on the time panel 5 .
appears on the time panel 5 to indicate
GB │ IE │
55 ■