Cleaning; Risk Of Electrocution; Storage - Auriol AFW 2 A1 Mode D'emploi

Synchronisation with DCF signal not possible
■ Disruptive obstacles or other interference sources such as
concrete walls or other radio transmission devices are
interfering with DCF signal reception .
Change the installation location (e .g . near a window)
and try again .
■ The batteries in the weather station are dead .
Replace the batteries .

Cleaning

DANGER

Risk of electrocution!

► Remove the mains adapter from the power socket before
starting to clean the device .
CAUTION
► To avoid irreparable damage to the device, ensure that no
moisture can penetrate the device during cleaning .
► Do not use caustic, abrasive or solvent-based cleaning
materials . These can damage the surfaces of the device .
♦ Clean the surfaces of the device with a soft, dry cloth .
For stubborn dirt, use a slightly damp cloth with a mild
detergent .

Storage

♦ If you do not intend to use the product for an extended
period of time, disconnect it from the power supply or
remove the batteries and store it in a clean, dry place
without exposure to direct sunlight .
│ GB │ IE
■ 62
AFW 2 A1