Charging Usb Devices - Auriol AFW 2 A1 Mode D'emploi

NOTE
► Only the values from outdoor sensors which are connected
to the weather station will be displayed .
► If you are using several outdoor sensors you should select
a different radio channel for each outdoor sensor .

Charging USB devices

CAUTION
► Use of the USB sockets t is only possible during mains
operation!
► Ensure that the power consumption of the USB device
is not higher than 2 .1 A if you are using just one of the
USB sockets . For more information, refer to the instruction
manual of your USB device .
► If you are using both USB sockets t simultaneously, the
total power consumption of the connected USB devices
may not exceed 2 .1 A!
♦ Connect your USB device to one of the USB sockets t .
The battery symbol flashes on the USB connection panel 4
and indicates that your USB device is being charged .
♦ Disconnect your USB device from the USB socket once it
has completely charged .
│ GB │ IE
■ 60
AFW 2 A1