Activating Or Deactivating The Alarm; Snooze Feature (Snooze); Temperature Unit; Temperature Warning - Auriol 4-LD5210 Utilisation Et Avertissements De Sécurite

Activating or deactivating the alarm

All manuals and user guides at all-guides.com
The slide switches AL1 -29 and AL2 -28 can be used to activate (ON) or deactivate (OFF) both alarms
separately.
If alarms are activated, the bell symbol and/or -15 for each alarm will appear on the display.
When the alarm sounds, if it is not turned off within 2 minutes, the alarm will stop automatically and sound again
after 24 hours.

Snooze feature (SNOOZE)

When the alarm sounds, press the SNOOZE/LIGHT-button 1 to temporarily stop the alarm. Z Z will blink on the
display and the alarm will sound again after 5 minutes.

Temperature unit

Press the MODE-button 21 1x long and 1x short to enter setting mode for °C or °F.
Now press the + -button 22 or - -button 23 to select the temperature unit Celsius (°C) or
Indoor-/outdoor-
Fahrenheit (°F).
temperature

Temperature warning

You may set a temperature warning with an upper and lower temperature limit by pressing and holding the - -
button 23 for 2 seconds. The upper limit (-15 - 50°C) will blink on the display and can be set by pressing the + -
button 22 or - -button 23. Confirm your setting by pressing the MODE-button 21. The lower limit (-20 - 50°C)
will blink on the display and can be set by pressing the + -button 22 or - -button 23. Confirm your setting by
pressing the MODE-button 21. If the temperature exceeds the upper limit or falls below the lower limit the
warning symbol will blink and an alarm will sound for the active or selected sensor channel.

Frost warning

If the outdoor sensor measures a temperature below +1 °C there is a danger of frost. The symbol
for the frost warning will blink and an alarm will sound. If the temperature is below -3°C for
a longer duration, the symbol for the frost warning will appear permanently.
NOTE: Even if the frost warning is not shown, when temperatures are near freezing there is always a danger
of frost and/or black ice. The outdoor sensor can only measure the temperature at the location at which it is
placed.
If using multiple outdoor sensors, the frost warning will only be active for the sensor with the lowest channel
number (1, 2 or 3).

Activating or deactivating the temperature and frost warnings

Press the - -button 23 once to activate the temperature alarm
.
Press the - -button 23 again to activate the frost warning .
Press the - -button 23 again to activate the temperature and the frost warning.
Press the - -button 23 again to deactivate the temperature and the frost warning.
- 59 -