Restarting Radio Signal Reception; Speed Setting; Basic Settings; Time Zone Adjustment - Auriol 4-LD5210 Utilisation Et Avertissements De Sécurite

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Restarting radio signal reception

All manuals and user guides at all-guides.com
Radio signal reception can be restarted by pressing the + -button 22 and the - -button 23 together for 2
seconds. The radio signal indicator 17
will blink on the display and the weather station will attempt to
receive the DCF77 time signal. This process may take 3-10 minutes.

Speed setting

Press and hold buttons to use the speed setting feature when setting numerical values.

Basic settings

The following basic settings are possible: Time format 12/24h, temperature unit °C/°F, air pressure unit
hPa/inHg, time zone, time, date and language of the day of the week indicator. Press and hold the MODE-
button 21 for 2 seconds in normal time display mode. The time format 24 hr/12hr will blink and can be set by
pressing the + -button 22 or - -button 23. Press the MODE-button 21 to confirm your setting. Set the air pressure
unit hPa/inHg, time zone 00- (-)11, hours, minutes, year, month, day and language of the day of the week
(GE=German, EN=English, IT=Italian, FR=French, ES=Spanish, DU=Dutch, DA=Danish, RU=Russian) in the
same way.

Time zone adjustment

If you are in a country, in which the clock displays the wrong time even though it can receive the DCF77 time
signal, please use the time zone adjustment to use your weather station in a time zone other than the standard
time zone (UTC+1 = Central European Time). Set the difference in hours (- 01 for example) to the desired time
zone.
Press the MODE-button 21 1x long and 3x short in normal time display mode. The time zone will blink and can
be set by pressing the + -button 22 or - -button 23. Press the MODE-button 21 to confirm your setting. The hours
will blink and the weather station will show the adjusted time (for example: 1 hour less) after a short while.

12/24-hour time format

Press MODE-button 21 1x long in normal time display mode. The 12- or 24-hour time format will blink on the
display and can be set by pressing the + -button 22 or - -button 23. When using the 12-hour format, the display
will show AM before noon and PM after noon.

Setting your location

Press the CITY-button 31 1x long. The abbreviation of the location will appear and can be set by pressing the +
-button 22 or - -button 23. If the location is changed, it will take some time before the adjusted values for sunrise
and sunset appear.
- 56 -

Publicité

Table des Matières
loading

Table des Matières