How Big Of An Area Can My Landroid; M Mow; How Efficiently Will My Landroid M Mow The Grass - Worx LANDROID WG794E Mode D'emploi

Masquer les pouces Voir aussi pour LANDROID WG794E:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 34
®
If the Landroid
M senses that something is wrong, it will display a fault message on the Display (16), and will turn itself off
if it does not receive any input from the user within 20 min (for information on fault messages refer to the Programming
and Troubleshooting Guide).
To resume:
Correct the problems.
Press ON/OFF Key (19).
Press START Key.
Now the Landroid
®
M will begin to mow!

3.3 How big of an area can my Landroid

®
Your Landroid
M is capable of mowing areas of up to around 1000m
Species of grass in your lawn and its growth rate.
Sharpness of the Cutting Blades (14).
Humidity.
Surrounding temperature.
Amount of obstacles in your Lawn.
If the surrounding temperature is very hot where you live then your Landroid
®
Landroid
M uses less energy in open areas that have fewer obstacles, such as flower beds, fountains, walkways, etc...
See the chart below for mowing time suggestions depending on the area of your lawn:
Mowing time are different for every lawn depending on the factors mentioned previously. Gradually adjust the time you
®
allow your Landroid
M to mow each day until you find most suitable setting.
3.4 How efficiently will my Landroid
®
The Landroid
M's cutting height can be adjusted between 2cm - 6cm. Before starting your Landroid
you should cut the grass to the height not more than 9 cm. Then make sure you open the Control Panel Cover (7) and set
the cutting height to its maximum cutting height of 6cm (See Fig. F , G).
F
Lawn Mowing Robot
Area(m
)
2
200
500
1000
®

M mow?

2
, although this depends on various factors, such as:
®
M may charge at a slightly slower rate. The
Recommended mowing time per day(hour)
4
13.5
27
®
M mow the grass?
G
®
M for the first time,
EN
11

Publicité

Table des Matières
loading

Table des Matières