Environmental Protection; Declaration Of Conformity - Worx WG776E.9 Traduction Des Instructions Initiales

To re-assemble, position the blade (15) with
the cutting edges towards the ground. Then
securely tighten the blade bolt (14).
STORAGE: (See Fig. N1, N2 )
Stop the mower and always remove the
safety key. Clean the exterior of the machine
thoroughly using a soft brush and cloth. Do
not use water, solvents or polishes. Remove
all grass and debris, especially from the
ventilation slots.
Turn the machine on its side and clean the
blade area. If grass cuttings are compacted
in the blade area, remove with a wooden or
plastic implement.
Store the machine in a dry place. Do not place
other objects on top of the machine.
To aid storage, release the handle cam lever,
and rotate or fold the upper handle.
ENVIRONMENTAL
PROTECTION
Waste electrical products must not be
disposed of with household waste.
Please recycle where facilities exist.
Check with your local authorities or retailer for
recycling advice.
Cordless Lawn Mower
All manuals and user guides at all-guides.com
DECLARATION OF
CONFORMITY
We,
POSITEC Germany GmbH
Konrad-Adenauer-Ufer 37
50668 Köln
Declare that the product,
Description WORX Cordless lawn mover
Type WG776E WG776E .9
(770-789-designation of machinery,
representative of Cordless Lawn Mower)
Function Mowing grass
Complies with the following Directives,
2006/42/EC, 2014/30/EU, 2011/65/EU,
2000/14/EC amended by 2005/88/EC.
2000/14/EC amended by 2005/88/EC.
Conformity assessment procedure as per Annex VI
Measured Sound Power Level
86.9dB(A) TURBO mode
77.1dB(A) QUIET mode
Declared Guaranteed Sound Power Level
88dB(A)
The notified body involved
Name: Intertek Testing & Certification
Ltd(notified body 0359)
Address: Davy Avenue, Knowlhill, Milton
Keynes, MK5 8NL
Standards conform to:
EN 60335-1 EN 60335-2-77
EN ISO 3744 EN 55014-1
EN 55014-2 EN 62233
The person authorized to compile the technical file,
Name: Russell Nicholson
Address: Positec Power Tools (Europe)
Ltd, PO Box 6242 Newbury RG14 9LT UK
Suzhou 2016/03/28
Allen Ding
Deputy Chief Engineer, Testing & Certification
15
EN